Quote:
Originally Posted by wanab5150
Mark 4...... If i said it incorrectly what I thought I said was us an impact on the 36mm nut. My bearing was obliterated so the spacers you speak of, what are they and do you have them or what do you use if they are destroyed........Everything but the bearing being presses off is done until I get parts.
I just went to your site and placed an order....you'll have my email there Thanks Tom
|
The spacers I refer to are on the top of the upright on either side of the rod end that secures the upright to the upper control arm. There are no spacers on the bearing.