Quote:
Originally Posted by AC Ventura
I’m just dialling in my QuickTime RM 6057 BH on my new aluminium pond blocked FE 427. Everything went together pretty good (except forgot dust shield before the flywheel!) but clocking the register, I get a total indicator (concentricity) error of .022”. So it’s .011” offecentre to the crank. I’m making some offset dowels now to put this right. However I’ve read people say their’s was within the permitted .005”. Anybody else experienced an error of .022” like I have?
|
Almost. I have the exact same set-up. My error was around .018". I bought offset dowels and dialed it in to .001". It took a few tries. Just tightening the six 7/16" housing bolts would tend to shift it a bit, so I would re-check and adjust as needed during tightening. It dialed in rather predictably.