[Large Arbor]

I also whacked on that curved part of the cutout to try to gain some additional clearance. I will use TA-31 and double cork gaskets with the windage tray to try to get it leak proof. I think that there are some minor differences in pan designs that have the cutout in its design. Shelby 7.5 quart pans for example do that. My goal is to put it all back together this weekend.

Thanks Patrick for placing the pics in the post. I am not sure why I cannot load pics.

If it still leaks after this repair, I will pull the pan off again in the fall of this year, enlarge it furtther and try again.

Thanks for all the helpful advice.

Phil