Quote:
Originally Posted by Jac Mac
Its a rubber seal, the front yoke if correct should have a machined area for it to seal against inside before the internal splines start and there should be one spline missing in the yoke so that the movement of yoke back & forth will not blow the core plug out of the yoke under induced hydraulic pressure. Sorry, cannot help with speedo gear ratios.
|
+1 Service yokes were sold as yoke and plug (seal) assemblies.
Page 40 of the 05-31-65 dated Shelby service parts book includes a listing for a 1959 model year yoke and plug assembly.
B9A-4841-C Yoke and Seal Assy $10.20