Got it all put back together and running tonight. Gotta say she runs strong and sounds great. Much better than before. I did check the other rockers and push rods and they look perfect. I also inspected the geometry based on the youtube video and to my eye I don't see any problems. The rockers are sitting nice and centered on the valve stem like in the video. Not too far forward or too far back. The pushrods are angled directly into the cups. I don't see any angle that would indicate its pushing out of the cup. I filtered the
oil and found nothing in it. I'll cut apart the
oil filter later when I have time. I cleaned up a bunch of bits that were under the bad rocker at the bottom of the head so hopefully that was most of it and anything else is in the filter.