[ERA 626]

Originally Posted by patrickt

Here are the steps:
- Wash Thoroughly with a detergent such as Simple Green
- Degrease with DupliColor PS100 Prep Spray
- Scuff w/ Red 3M Scotchbrite Pads
- Degrease with DupliColor PS100 Prep Spray
- Rinse with water while using Scotchbrite Pads
- Tape off the wheel with 3m Blue Edge Lock Tape
- Apply 2 light coats of DupliColor CP199 Adhesion Promoter
- Apply 3 coats of DupliColor your favorite color here
- Apply 4 coats of Valspar Flat Clear Coat Enamel

Thank you,
I am looking to paint or powder coat the entire rim not just the inner, I am concerned that if its just painted it will chip easily.