[AdamIsAdam]

Circling back with pics, because without pics, it didn't happen, right?

I had to wait for the PPF to cure. Since my badges are stick on, the reference points in the ERA diagram don't totally work (no peg holes). But as best as I can tell, 1/2" above the vent openings and centered, looked about right. I also quickly realized that using a level wouldn't work because who knows if the car and/or garage are level. So instead I used 1/2" wide electrical tape to create a parallel line above the vent hole, marked center and in the end, eye-balled it!

In the garage it looks good. We'll see how it looks outside later.