Quote:
Originally Posted by bwcobra15
. . . other sizes available are .700 and .625 bore. So can I go down to move more fluid to the Tilton HTOB.
|
Bobby
Going down is going the wrong direction. The smaller puck will move LESS fluid with the same amount of movement.
According to the Tilton installation page (
https://tiltonracing.com/wp-content/...ies-HRB-V2.pdf) According to their page, 3/4" would work if you get about 1.3" of cylinder movement. Which I suspect you are not, especially since you lengthened the pedal. You probably should be looking at a 13/16" cylinder and figuring out how to modify your pedal lengths and stops so you are getting 1-1/4" of cylinder puck movement.
Paul