Quote:
Originally Posted by Gaz64
The photo above of Hauss's broken 5th/rev rail shows 2 pieces at the fracture point. The roll pin secures the roller that follows the selector lever.
About 20:20 in the video.
Gary
|
Yes. Looking at the picture and video, it seems to me that the real issue is the hole size for the roller, which seems to be very large in comparison to the diameter of the shaft, and appears to be the location of the fracture, as opposed to the roll pin which is a much smaller hole just beyond the fracture point. Maybe the solution is to make the roller a smaller diameter ? with a new corresponding shaft ?