[133bus]

Not knowing what make or how your steering is set up I can only speak of my own experience...I have a Mustang II set up and it was terrible and scary to drive over any kind of rough road...I had it lined up twice with no difference in the shake that I would experience...What I did was put my car on my lift and with out lifting it I measured the height of the body to top of tire and the width from center of tire to center of tire...then I lifted the car and removed the shocks which would let me move the suspension through its normal travel more easily...what I found was about 1 inches difference in width through normal travel of the suspension...so I bought a Bump-Steer eliminator kit for my style of front end and installed it myself...after a lot of measuring and trial and error and another alignment it is a lot better...not prefect but now I just get more of a vibration when I hit a bump or pothole...steve