Quote:
Originally Posted by Sycraft
Cowl Bar Installation
The parts required for installing the cowl bar are:
Description of Part Quantity
Cowl Bar ........................................... 1
5/16" x 3-1/2" Bolts ........................... 4
5/16" Flange Nuts ............................ .4
Use the procedure outlined below to install the cowl bar:
1) Place the cowl bar on the outriggers flush up against the firewall (Fig. 3-104).
2) Align the mounting holes on the cowl bar with the holes on the outriggers. Connect the cowl bar to the
outriggers with two 5/16" x 3-1/2" bolts and flange nuts per side (Fig. 3-105).
this is the only reference I have
|
Sycraft. Thanks for the response. What does the firewall itself attach to? The only reference in the manual I see is in the pic attached. I can get it attached, just wanted to do it correctly LOL
Jeff