Quote:
Originally Posted by KarlzEE Bebout
The manifold for my Webers has two ports on the floor of the manifold, sealed by pipe plugs. I ran an inline PCV valve over to the valve cover breathers.
Drastically cut down on oil blow by. |
Plumb one of these between the PCV and that manifold connection.
Compact air/
oil separator will stop the lion's share of contaminants
from entering the combustion chambers. Very compact solution
to ensure only cleansed air gets re-introduced into the intake.
Bottom screws off to empty and it even has a dipstick.
https://www.addw1.com/collections/oi...-configuration