Quote:
Originally Posted by CompFi
Ed, no argument from me on the tuning problem. It is the solution that is proving elusive. Though Billy Andrews could have probably resolved this issue blind-folded....
But not as if I have been unwilling to throw $$ at it by deferring to experts. Once this issue began last Summer, I started to ask around for recommendations for a local shop. I was hesitant, but I followed the consensus feedback and took the car to a local shop claiming to specialize in 60s muscle cars. I didnt balk at the sizable quote for time on the dyno etc to tune the carb. Thing is, the shop never put the car on the dyno. They fiddled with the carb etc. I still got hit with a sizable bill, more than your estimate. And I didnt even get any time on the dyno. 
So, believe me. I take your point. My incremental troubleshooting is far from ideal. At best, this is Plan C. Which is why I am so grateful to all here for the guidance. And patience. Hopefully something here also helps the next person that finds themselves in my situation. |
I'm sorry, but I'm not surprised to hear that, Brian. The number of "tuners" who actually understand the process and how to go about it with a Holley is few and getting smaller at an alarming pace. I wish I could pull a rabbit out of a hat and say go here, but I don't have any credible suggestions.
There are a number of quite good engine builders who frequent the CC site here. I believe some of them have dynamometers they use to tune and provide a final QA check prior to shipping an engine to their customers.
The one I have in mind is Brent Lykins. I think, but don't know if he has a dyno. At the very least, he probably could get your Holley into the ballpark. If, as I suspect, he has or has access to a dyno, he would be my first suggestion for a proper resolution to the problem. He is quite good and has been very engaging and easy to talk to on the site here. I think he is a good bet and definitely worth a shot.
Here is a link to his website;
https://lykinsmotorsports.com/engines
His website pics show finished engines being run on a dyno, so he does have or have access to one. His phone number is (502) 759-1431, which sounds like Northern Kentucky. That's quite a way from VT, but it might well be worth the effort. I am not sure you will find the knowledge to successfully address this problem in VT.