Thread: Mustang II Master Cylinder + Rear Versailles brakes = little rear brakes
View Single Post
  #1 (permalink)  
Old 08-14-2002, 09:48 AM
Curt C.'s Avatar
Curt C. Curt C. is offline
CC Member
Visit my Photo Gallery

 
Join Date: Nov 1999
Location: Las Vegas, NV
Cobra Make, Engine: Classic Roadster; 351W
Posts: 743
Not Ranked     
Default Mustang II Master Cylinder + Rear Versailles brakes = little rear brakes
Hey Guys. DV I hope you can help me here. I have a CR with Wilwood 4 piston calipers in front and a 9 inch ford with disc brakes out of a Versailles. Car stops ok, but bias is way too high towards the front. The rears are hardly getting any heat in them. Is the power brake booster and master cylinder from the mustang II not compatible with rear disc brakes? I could plumb a proportioning valve in the front brakes, but this would just be a band aid. Any ideas?

Curt
Reply With Quote