[ronzara]

Well, I hooked up the Battery, Seems like every thing is holding together... didn't hear any pops, see any sparks or smell any wires cooking... I guess thats good news...
Bad News is, I 've got fan motor when key is on, (So Iam getting juice) but when I hit the starter.... nothing.

Here's my config:
GM column ... Dash mounted ignition switch.
I have these wires connected to the ignition switch:

111 to BAT
120 to IGN
122 to ACC
121 to ST

I think my problem my be there are several wires left in the pigtail that are not attached to anything:
126, another 121 >> (both of these have FEMALE Slide in connecters,
and #125 >>>> manual says 126 and 121 have to do with the solenoid, but I don't know what to do with them (If anything).


On my Solenoid this this the wiring:
109, 110 and BAT POS on the left lug
126 to the "S"
189 to the "I"
and the STARTER WIRE coming out of the Right side Lug....

Is it possible the Power goes in the RIGHT side of the Solenoid??

HELP!!!! I AM SOOOOO CLOSE!!
RZ