Cobra Stripes For Classic Roadster's Cobra
Here are the cobra stripe diminsions for a Classic Roadster that correspond to the original stripes but are enlarged to meet the longer and wider wheel base.
front bottom to bottom of opening
(including
oil cooler) 6"
top of front opening to engine comp 7"
hood scoop opening 7 1/2"
back of hood 8"
passenger compartment 8 1/4"
passenger compartment back 8 1/4"
top of trunk 8"
trunk down 10" toward rear bottom 7 3/4"
top of plate holder mold 6 3/4"
bottom of trunk 6 1/4"
bottom of car 6"
Also, the inside of the engine compartment and trunk compartment was treated like an overspray with the paint only going 1/4" down, not the entire depth of the mold. No stripes were under the hood or trunk as some I have seen.
The width of the space between the stripes is still 1" but can be widened to 1 1/16" depending on how you feel about it.
Sorry for the delay,
jayscobras
jay
I got this from Jay awhile back.....maybe could help you out.
Snake.