[Rustang351c]

Hello,
I'm building a motor for "hot street", and will use a highway gear. I want to motor to have torque all the up, be very streetable, but still have as much top end as I can get. Also want to can the price as low as possible, so I'm going w/ a carb. This is what I've been considering:
PMEracing 393w kit (K.B.pistons,H rods, Scat Crank,$1075)
Edelbrock RPM cam 224/234 @.050 .496/.520 w/ 1.6's
or CompCam#12-246-3 230/236 @.050 .519/.523 w/ 1.6's
or CompCam#12-423-8 224/230 @.050 .535/.544 w/ 1.6's (roller cam)
World Windsor Sr. lites, AFR185's, EdelbrockRPM's or Victor Jr. heads
Edelbrock RPM airgap intake
Holley750 #3310 vac.sec.
Duraspark Ign. / 1 5/8" headers

Is this a matched set? The pistons are dished so the ratio should be @ 10:1 or so.


What "CAM-HEAD-CARB." combination would you use for a "Hot-Street" car?!?