Not Ranked
Edelbrock Carb tuning
I have an Edelbrock 1406 (600cfm) carb that I am trying to tune. I currently have .073 x .047 metering rods, .098 primary and .098 secondary Jets and the 4in Yellow Step-Up springs.
Heavy acceleration from a standing stop is very sluggish. I have moved the external setting for the Accelerator pump, and it does not get better (currently set on center hole). Rolling acceleration seems to be good. Timing is set to about 12 deg. before TDC and I just installed a Pertronix Ignitor.
What changes can I make to help?
|