View Single Post
  #1 (permalink)  
Old 06-01-2003, 12:10 AM
Tinker51 Tinker51 is offline
Club Cobra Member
Visit my Photo Gallery

 
Join Date: Feb 2003
Location: SF East Bay, Ca
Cobra Make, Engine: SPF
Posts: 499
Send a message via AIM to Tinker51
Not Ranked     
Default Another SPF design problem?

Since Mulv was soundly trounced with his post about the differential mount I thought I would put up one of my own to take the heat off. As we were leaving the second winery today I briefly heard a clanking noise that went away in about ten seconds but since we were driving past a piece of equipment I paid no attention to it. As we left the third winery I heard it again. When we got to the picnic grounds I looked around and found that the aft hanger for the exhaust pipe had broken. When I got home I pulled the pipe off the car, welded the bracket up, quick shot of high temp paint, hung the pipe and good as new in 45 minutes. You all may want to take a quick look at your brackets to see if they are cracked or breaking. Let the flames begin.
__________________
We have enough youth. What we need is a fountain of common sense
Reply With Quote