[Keithc8]

I would like to sat that I have e-mailed Brent Milss several personal messages about advertising on this sight. I have yet to hear from him. I have no problem with paying and offering some discounts to the members of this sight. This engine cost about 22,000.00 turn key of the dyno with the high torque starter and aluminum flywheel. We used a DaVinci 950HP carb done to our specs for our engines. This engine with 12.5 to 1, our CNC ported heads and a solid roller would yield about 800HP. Mr. Turpin I believe your engine should make somewhere in the 750 to 800 HP range. As far as the dyno comment this is correct if the owner of the dyno does not keep his machine calibrated. We do NHRA national record engines and these guys know how fast there cars are to within a few hundreths. So me giving bogus HP numbers does not fly with these guys. We can duplicate this package for any one. We also recently finished a 489C.I. FE with 14 to one compression with Dove high riser heads and a dove single 4bl. intake and a dominator carb that made 870HP. This engine as run 8.39 @ 160MPH in a 2700lb. car so I believe my dyno is fairly accurate. I hope we can get someadvertising on hear soon . Thanks Keith