[Rangerstx]

Its nice to finally find a forum that has just 429/460 stuff!

I have a project car that I want to put a 460 in. At this point I am unsure if I want to stroke it, if I do it will be a 514, nothing major.

I want to use the new FMS SCJ alloy heads, edel brock Performer RPM or victor intake, Eagle rods and JE pistons. I am unsure how much the stock crank can take if prepared correctly as I want to hit 6500RPM on occasion. If its a no-go I will look at a scat crank.

Here is where things get real pricey. I want to go with EFI plumbed into the intake with a 850CFM TB and use the EEC-V so that I can use availble tuners/laptop programs.

I am also trying to find makers of alloy engine blocks. Basically I want insane TQ in a package that weighs less than a 302 SB and back it up with a T-56 6sp.

I figure the awsome low end TQ, EFI, and an ultra low 6th gear should net me some decent milage while getting acceleration that should shoot your eyes to the back of your head.

So...if anyone knows and makers of 460 alloy blocks or makers of nodular iron or forged cranks please give me a shout out here!

Thanks,
Bryan