[rbray]

Hi guys and merry Christmas,

My engine cut off yesterday and would not restart.
I pulled a plug to see if there was any spark and there was not.
Step two was pulling coil wire and putting the pug in it see what was going on with the coil. I got spark for the first few cranks but then noting. I repeated the test and did not get any spark at all.
Another test showed spark again for a few cranks and then spark stopped

All the connections seem to be fine.
This is probably a simple problem for an experineced mechanic, but I'm just a hobbist so I could some advice.
I'm running an MSD 6AL with an MSD coil.
Any help would be appreciated.

Thanks,
Roger