Not Ranked
My list of parts.
Sell the dual four on ebay for $$$ and buy Victor Jr. and 830 CFM race carb (best carb for the $)
sell steel crank and 428 crank and get SCAT 4.25 stroke crank
BB Chevy Eagle rods
Crower Cam with 114 degree lobe center with about 290 degrees duration.
Edelbrock 6008 heads
forged pistons with 10:1 compression
E-brock water pump
MSD distributer with 6AL
I would change the gears or you will not be able to keep rear tires on the car. This engine will be tons of fun on the street.
If you must stay with the 3.73 gears use the steel crank, Eagle Chrysler rods, sell the LeMans rods, and go with the best valvetrain your wallet can stand. Go with a Crower cam with lots of duration and a lobe center closer to 108 degrees. Aviad Pan if original style frame. This will not be a fun engine on the street. But it will make a good track engine.
|