[Cobra75]

Ok, my engine's being rebuilt. How about some recommendations for a cam.

Here's what I have so far.
Shelby block, .040 over, stroker Scat crank, 454 ci
Oliver rods, Ross flat tops, 10.5:1+ CR
Edelbrock heads ported & polished w. larger valves
Dual plane intake port matched, Holley 750
Harland sharp roller rockers, Crane hydraulic roller lifters
Pump gas-93 octane!

Useage: 90% street, 10% track events
To be driven frequently, year round
Lumpy idle not an issue.