Got a 460 What kit(s)?

farkedup · #1 (**permalink**) 05-30-2006, 08:03 PM

I have a 460 and a C6 sitting here and I'm wondering which kits work best for cramming these monsters in. I also want good instructions because most of this stuff I've never done before

LMH · #2 (**permalink**) 05-30-2006, 08:55 PM

Call Mike or Rich at Hurricane and ask them if that combo would work.
My guess is it would but better ask to make sure.
Larry
http://www.hurricane-motorsports.com/index.jsp

RichBurroughs · #3 (**permalink**) 05-31-2006, 10:02 AM

We support both the 460 engine and the C6 auto in our kits. All of our kits come with a 200+ page detailed instruction manual. Give us a call - we would be happy to discuss the details with you.

ByronRACE · #4 (**permalink**) 06-05-2006, 02:03 PM

A friend has a Superformance with a 545" 385 series (460 family) but I'm not sure they can fit a C6.

I have a West Coast with a supercharged 435" 385 series and a viper 6spd; but I know the C6 will fit; that's what the car comes with usually.

I've seen at least 4 other cobra makes with a 385 series, but most of the time they are manual trans.

Clois Harlan · #5 (**permalink**) 06-05-2006, 02:07 PM

I know B&B supports both 385 series and C-6 as does several others including SPF.

Clois

Ken Bisconti · #6 (**permalink**) 06-06-2006, 12:24 PM

I have a 390FE with a c6 auto trans. in my Hurricane. It fit fine with Lokar linkage.

theryno102270 · #7 (**permalink**) 06-09-2006, 08:53 AM

Quote:

Originally Posted by farkedup

I have a 460 and a C6 sitting here and I'm wondering which kits work best for cramming these monsters in. I also want good instructions because most of this stuff I've never done before

Dude,
I stuffed a 460 in my Cobra ! Only problem is : The frame was extended 6" on both the width and length . I added dual coil over shocks to an indepenant Jaguar rear end ( total of 4 ) .I am customizing the body under carraige in the front corners with fiberglass wings hidden under the main body for down force at speeds well over 160 mph. I am also having a small problem with the " HEADERS " , I need to " STUFF " them into the wheel well and make them pop out the side in back of the front wheels !
HELP , anyone have some shorties ? Sincerely , Ryan " The Ryno" Millay
( 818 ) 741-0803 or page me at ( 818 ) 420-2154

jdean · #8 (**permalink**) 06-14-2006, 09:08 AM

Classic Roadsters kit will fit the 460 and C6. They also have the motor mounts, headers etc. that go with it.