Not Ranked
Kinda amazed at this thread... I used Aeroquip lines from the tank to the fuel filter/pump and then the long run all the way to my fuel log. Never had any problems; lines are clamped about every 18" or so, (not every 3" as in a earlier post), no apparent flexing or abrasion going on.
I would guess that the need for hard lines would be with fuel injection (at the higher pressures), my carbs at 5-7lbs are just fine with the braided stuff.
I went with the braided stuff so that it could make all the bends easily and also would have some protection anything that gets kicked up under the car like small rocks, broken glass, etc.
- Dan
|