Description:
Brand NEW* Superformance Cobra. Never titled. Just completed powertrain and drivetrain installation 4/9/04. Only driven enough to tune the engine and have a 4 wheel alignment (under 50 miles).
See more pics in my gallery. Since pics were taken, braided hoses were hooked up to
oil cooler (although not functional) and wiring coming along fuel line was better organized.
Car is Black with following options:
Silver Ceramic Coated Exhaust
Roadster Bumpers (Front & Rear)
Glove Box
Sunvisor Assembly
295/50 Rear Tires – BF Goodrich T/As
Clear Stone Guards
Wood Steering Wheel
Oil Cooler
Polished Stainless Roll Bar
New Style Emergency Brake
White Racing Stripes
Cobra Floormats from Tony Branda
Soft Top, Curtains, and Tonneau cover (fitted at factory but never installed since then)
Powertrain:
NOS 428 block (have original Ford box that it came in)
Balanced rotating assembly
428CJ crank and rods (std – std) from low mileage T-bird
Edelbrock RPM aluminum heads w/ Stage I port job
Comp Cams 282S solid lifter cam
Smith Bros. Pushrods
Erson Roller Rockers
Precision Pumps blueprinted
oil pump
Aviaid oil pan
ARP fasteners throughout
Holley 750 cfm vacuum secondaries, electric choke
Chrome Alternator
Cobra 427 valve covers
Cobra Oval air cleaner
MSD Distributor
Polished stainless expansion tank
March pulleys
OEM Starter
Carter Electric Fuel Pump
Taylor 8mm Spark Plug Wires
Edelbrock Performer RPM intake
Edelbrock aluminum water pump
MSD 6AL box with rev limiter
Drivetrain is a Tremec TKO 5-speed manual:
Tremec TKO 5 speed tranny
GM Synchromesh fluid
Shifter looks like old 4-speed Toploader
McLeod Aluminum Flywheel
Lakewood Blowproof bellhousing
The following parts were powdercoated Mirror Silver with a Clear Coat (very durable, easy to clean and great looking):
Intake
Valve covers
Air Cleaner
Bellhousing
Waterpump
Oil Pan
Timing Cover
This is a beautiful car! Engine is awesome: very streetable yet has nice lopey idle. I’m only listing this car for sale because I love finishing them. If this one sells, I’ll get another one and finish it. If it doesn’t, I’ll enjoy it myself. Asking price is set just high enough to compensate for some of my labor.
Price: $53,000 obo
Might consider partial trade of Kirkham roller/project - that's what I want to do next.
Call me for more info: 765-922-4636.
Email:
nosyjoe@hotmail.com
Terms of Sale
Buyer will receive a Manufacturer’s Statement of Origin from Dynamic Motorsports (where I bought rolling chassis) and a Bill of Sale from me. This way buyer is able to title and license vehicle however way is easiest in their state of residence. Balance to be paid via wire transfer before car is delivered or picked up.
*There is no warranty implied or offered. In other words, this car would be considered “used” legally, as I am not a dealership nor am I affiliated with one. Car is now 200+ car numbers behind rollers at dealerships because I took my time finishing it. Only thing I know of that it didn't have that new ones do was pinion mounted e-brake and Dynamic put one on for me. Some parts (long block and valvetrain) of the engine were slightly used by thundercat, but I consider this an advantage because I know the engine is a good one and the assembly was done right.