Just had to chime in here,
Chime, chime.........
oh well, Steve your right about the angle. I had my rear knock-off's "stuck" last year and all the beating on the them resulted in bent ears because there is no way to get a direct solid whack on those suckers. I went over to Tony's and he had Rick's prototype knock-off tool. Even with that we had to use a long handled sledge hammer to get the spinners off. Tony suggested that to much anit-sieze could be the problem and that it may be promoting the galling that occurs between the wheel and spinner. Anyway, I know that short of cutting off the spinners that tool was the only way they were coming off. Good to hear from you.
Mike