Thread: which heads
View Single Post
  #10 (permalink)  
Old 07-10-2004, 01:15 PM
MidOHasp MidOHasp is offline
CC Member
Visit my Photo Gallery

 
Join Date: Jul 2003
Location: Cleveland, OH
Cobra Make, Engine: SPF1670 Stroked Little Windsor - Runs OK.
Posts: 1,244
Send a message via AIM to MidOHasp
Not Ranked     
Default
280H cam is good cam. I'm running a 282HR.

205cc heads are really big for 347. I run 185s on a 408! Many say too small! I tend to agree! BUT!!!! 544 lb-ft. of torque probably wouldn't have happened (at least not as early in the torque curve) with 205cc heads.

W/ that cam and my 185 cc AFR heads, I can turn 1500 RPM on the highway if I have to (never want to) but the thing is a real babydoll at 2K-3K. Comes on good at 3K, at 4K starts screaming, and does so to 6500 when the valvetrain, intake, and heads all simultaneously give up....right where I want them to.

FWIW...
JP
__________________
J.P.
Ohio Cobra Club
Token Gashole
Reply With Quote