Ha ha,,,, I should have known when I opened the FE can of worms. There is NO WAY to "freshen" one of THESE motors without spending big bucks!
I was just going to replace the existing cam with the same model. Nah, I should go a little with a little less I thought. Well, I need to reduce the heavy valve springs so I should pull the heads and check 'em out. Well,,,,, now that I got the heads off, maybe I'll just look in the pan and see how things are in there.
...be a piece of cake to pop out a piston, you know, now that I got the pan off and all.
"Ross" custom pistons, quoted a $1000 today. Roller Hydraulics, $800 easy. Cam, lifters, springs, etc. Yup, I'm gonna need Master Card!
