[Lubrecon]

Aggie or Cal:

I am putting 48 IDA's on a 408. I have read all of the info both of you have posted, and would like a starting point. The LS on the cam is 112 degrees, and I will get you the cam specs tomorrow, they are at the office. I would like to know if Aggie's set up on the FE will work for my 408, i.e., 37 mm chokes, 160 mains, 200 AC, 60 idles, 120 holders, 55 by pass, and F7 tubes, since the 427 is close to the 408 of mine.

I have a friend telling me I need 40 or 42 chokes on this much displacement, but Dan at Inglese says 37's are fine. My friend has 42's on a 302 and loves them. However, he races the GT 350 and the high RPM's could mean the difference.

Your comments and suggections are requested and respected.

I live in Houston, and my office # is 281-890-6400.

thanks,

Jerry Shelby