[BDRCobra]

When adjusting the front coil overs do you adjust each spring adjuster the same amount? The reason I ask is to maintain the same frame height from ground on each side I have to adjust the two coil overs differently. In other words on one side the spring is more compressed than on the other one. If I adjust them the same than the driver side sits quite a bit lower.

My second question is when looking at the vehicle the front tires lean in at the top. Not alot but noticable. Is this for performance reasons or will the alignment shop correct this.

I have the BDR alignment recommendation which I will give to the alignment shop.