[RICK LAKE]

57fairlane428 If you know the right length, Smithbrothers can make a set of pushrods and have them to you by Tues. Are they cup and ball or ball and ball? There are 2 different size balls, 5/16" and 3/8" but you can get the rod tube in either size. Greg at 18003671533 or 15413888188. You may want to go over to the FE-Forum and do a search, they have alot of info and a couple of wizards that know all this stuff. May sure that the pushrod dones not interfear with the intake on full lift. The lengh I have for the pushrods is 9.157" You need a rocker checker so the center of the roller on the rocker tip sits in the middle of the valve through the whole cycle of opening and closing. Do not hold me to the lenght but I think it is, never mind. Call Erson or go on line. Cheaspeake has grow alot since the 60's, did some camping at Cherrystone back then. Cheriton is all built up by now. Great fishing and crabbing. Rick Lake