OK, I got me expansion tank from Enzo, have it all mounted, now I need to plumb it in.
It has 3 outlets, one for the radiator hose to the radiator, then it has 2 small outlets one in the neck of the filler tube under the cap and the other on the actual side of the tank towards the top.
I am think the small one in the neck under the cap is for the overflow, and will need ran into my overflow tank. but I have no idea where the one on the side of the tank needs to go or what it is actually for, or if it is actually needed. I do not have any other inlets in my radiator or anywhere else that I know of.
Can someone help and give me some instructions on plumbing this in properly.
Thanks again for all of the help and information.
Jim
