Quote:
Originally posted by RICK LAKE
Darryl Call the cam company and talk to tech. Raise a little hell and see what happens. May not be your fault. See what they say about a 18,000$ motor being damaged and a top machine shop did the machine work. If that doesnot work, ask to talk to the CEO. Nobody like bad press. You wil;l need to send the block back for new bearings and to be rechecked. You might want to let KCR do all the work on assembly and running breakin. Just a thought. I am going to bed. EST time talk to you later Rick
|
Daryl,
One thing about Crower Cams:
When you call with a question they will put Dave Crower himself on the phone. I'd give him a call.
Good luck.
-Michael