Hi Byron,
Well the Lakewood is a real PITA. I've measured many times and I know I'm out at least .030 total. Thats .015 per side and .010 out of spec. The hole itself is actually oblong by .003 top to bottom measured with a good set of verneers. I do not understand why they can't do a better job with the manufacture of these things. Anyway, I'm out of time. The Glen is coming up on the 22nd and 23rd of this month and I have a huge list of things to do to prep, so the Lakewood will have to wait. I'm going back to the stock housing for this run and I will switch out the dowels and housing this winter. At least the leaks are stopped.
I will get more video this time at the Glen and upload it when I get back.
--Mike