[Tim Brewer]

Hey guys, thanks for replying.
Here's what I have: March serpentine pulleys. It's kinda hard to measure exact, but it looks like the crank is close to 6 1/2" measured on the lip and the pump is aprox. 5 3/4 " on the lip. It's part # 30240.
My radiator is custom made 4 core by Griffin, it's 20.5" wide and 18" tall and 3" thick. I have a drilled 160 thermostat that is working. My water pump is an Edelbrock, part # 8866. I ditched the Cool Flex hoses and replaced them with universal rubber hoses because someone told me they will make big blocks run hot. I mainly only run the car in the evenings the keep the temps down. I would say on average the temps are in the 210-220 range. But on a warm day (like today) it will go over 220 and boil over and out my catch tank,(which is one of those chrome long round ones). My cap is an 18# one.
Thanks for your help guys,
Tim