[Rebel1]

Dunno if there is any right or wrong way to clean them, but here is what I did.

I took the whole lot to a mate who had a steam cleaner...he cleaned them up and he then sprayed a very light anti corrosion stuff on them. That last stuff was very much like wd40 or similiar.

Once he was finished it all looked brand new. Even the shocks had their original stickers on them.

I then set about pulling the bits I wanted. I cleaned all those bits again and then wire brushed them mainly to get the original paint off them.

I then gave them a coat of POR15.

They now look like they have been powder coated.

Cheers