[Philm]

Craig,
AS Steve has said the power steering rack is a bolt up fit, the steering shaft is the challenge. I used the VL coupling and the bottom half of the VL intermediate shaft which is a universal joint on one end.

I cut Ians shaft and the Vl shaft, turned the VL shaft to the same dimater for 100mm then joined the two with a steel tube and pined and welded the ends.

I will put a pck in my gallery tonight.

Steve will you be going to the nationals in October, I hope so we can see your car in person.

The CR comminity is growing, good to see another on the road.

Phil