[Keithc8]

I have for sale the new Superformance Cobra we built and took to the London, Ohio Cobra meet. This is a black with titanium stripe car that draws a lot of attention. I built a SBF 427 with a Dart cast iron Sportsman block with 4.125 bore and a Eagle 4.000 stroke steel crankshaft. Zero balanced with a aluminum Ram flywheel, clutch and pressure plate to hold up to the 635HP and 600 ft/lbs torque. The engine is 10.5 to 1 with a custom hydraulic roller camshaft and Crane lifters that let the engine turn 7000 rpms. Brodix KCR 225 CNC ported heads with Victor JR intake and ProSystem carburetor. Coated headers and side pipes, chrome lift jacks, polished over flow tank, leather steering wheel , glove box with soft top. Detailing on the car is very nice under the hood with March polished pulleys and brackets with Power Master chrome alternator.
This car will run down the interstate at 2000 rpms great or will turn 6800 rpms and out run most stuff out there. This car ran the fastest mph at the London meet. I will say that running your car full blast down one of the main streets of town is different. I would say that it was a little more than 1/8 mile and we made it to 108 mphs with a rider.
So if you do not want to wait for sevral weeks to have a car for the rest of the summer this is the car for you. Complete ready to go for 66,750.00 with no regrets. I can be reached at 870-246-7460. Car has less than 75 miles on it right now. Thanks, Keith Craft