I have the PICS of the engine along with the casting numbers.
Five bolt Block c4oe_6015f date code 5h24
Main Caps 1-k8 hipo caps
rod caps have the number four on them with the ford logo also 3/8 bolts
balancer c5ae 63164a it measures the size of a hipo balancer
Heads date codes look to be different on each but they were ported by crane cams in the late 60s or yearly 70s date codes are D5L4 4M17 these are hipo headsIF you want to see the valves I will pull a head and photo it also. The heads have 1.94 intake valves and 1.6 exchast valves.
Plus I have new ross pistons in the engine. I also have have the trw replacement pistons new in a box. The engine is .030 over and has NOT been run.The crank (with extra counter weight) is standard/standard.
How did I get the engine and why am I selling it.
The engine was in my 66 Mk 1a Tiger(I know its not the original engine for a tiger). I just sold my Tiger without the engine. I have a 34 Dodge hot rod I want to finish after I finish doing some work to my 2004 z06 Vette. I got the engine with a edelbrock torquer intake and the Mallory dual point. The heads and mains have studs installed but I may have the original head and main bolts. .
I would like to get $3000 plus shipping for the engine. Open to offers .The engine is in Glendora Ca 91740 Email
petercln@aol.com for pics