Thread: flat tappet hydraulic vs. hydraulic roller cam
View Single Post
  #10 (permalink)  
Old 10-20-2006, 03:25 AM
69 Mach I's Avatar
69 Mach I 69 Mach I is offline
CC Member
Visit my Photo Gallery

 
Join Date: Feb 2004
Location: Almere, NL
Cobra Make, Engine: No cobra YET. Making do for now with a 69 Mach I
Posts: 107
Not Ranked     
Default
These are the flow numbers after porting:

Intake/Exhaust .100" 79/61
Intake/Exhaust .200" 145/121
Intake/Exhaust .300" 198/168
Intake/Exhaust .400" 241/178
Intake/Exhaust .500" 279/196
Intake/Exhaust .600" 284/205

I have 3.70s in the back and a 2800-3000 stall. I am thinking that this would be a good cam to go with it:

Comp Cams part number 35-426-8, grind no. XR288RF-HR (Hydraulic roller)

Adv Dur:
Intake: 288
Exh: 294

Dur at .050
Intake: 236
Exh: 240

valve lift with 1.6 rocker
Intake: 555
Exh: 576

Do you guys concur with this selection?
__________________
I can only please one person a day but today is not your day. And tomorrow isn't looking too good either.
Last edited by 69 Mach I; 10-20-2006 at 08:16 AM..
Reply With Quote