[NOSMS]

It was taken from csx3190 and cleaned up. The plug was originally used to make the second generation Hi-Tech body molds. The last 30 or so cars were built with bodies from that mold. Then is was corrected for all the small imperfection the were noticed while building those cars. When Hi-tech closed down it was sitting at the body shop that did the work on it, and a Hi-tech customer purchased it. From there it went to a small cobra builder in Phoenix who pulled a mold off of it. I took it in trade for some chasis and suspension work I did for that company and it has set ever since. it is pretty clean and would make a great mold or pattern for a alloy body.

Mike