View Single Post
  #1 (permalink)  
Old 07-02-2001, 04:17 PM
Peeps Peeps is offline
CC Member
Visit my Photo Gallery

 
Join Date: Sep 2000
Location: Carmel,California,USA,
Posts: 9
Not Ranked     
Unhappy Shell Valley (My Baby)

Due to a Family emergency (this is not a put-on) and after exhausting all other options I must sell my Passion. I bought it last year and while towing it back to California I had the most wonderful dreams of driving it. Hopefully in the near future after this crisis passes by, I will once again have my dream. It's been wonderfull looking through Club Cobra each day for almost the past 2 years and sometimes participating, of which I will continue to do.
This whole thing came up so quickly that I don't have pictures as yet but will have them by the 4th of July. Never figured I would be selling the Cobra so I really don't know what to ask so I guess I'll just go with the best offer. Enough of my crying and let me give you a list of what I have:

I've spent the last year collecting parts I felt I would need to make this as close to original as possible.
Complete Shell Valley Kit
Kevlar Body
Brand new set of Trigo Pin drive wheels with adaptors and New Dunlop Tires
All lights including turn signals
Chrome Roll Bar
Complete wiring
Complete Door,Hood and Trunk hardware (handles, hinges etc.)
Windshield with Windwings and Visors
Mirrors
All correct Body Emblems
Leather Bucket Seats
Steering column with a Wood Rim Motolita Wheel with a Cobra center cap
4 speed top-loader trans.
Lakewood Bellhousing
Tilton Pedal Assembley
Slave Cylinders etc.
All brake lines
428 FE engine. This came as a complete engine with all brackets, starter etc. so you won't be searching trying to locate those hard to find parts. The block, crank etc. have been Hot Tanked and Magna-Fluxed for cracks (none found). This engine is so low mileage that it is still standard bore with now scarring and the crank just need a minor polishing with now grinding. Al you need to add are your choices for speed equipment (Heads, Intake Manifold, Carb etc.)
Set of 428 Headers and side pipes and a complete 428 header kit with professinally fabricated set of header flanges with 2" tubing stubs welded on. I was going to make my own wet of custom headers.

I'm sure there is more and like I said, I will have pictures by the afternoon of the 4th of July.
Thank You
For more information call me or e-mail me.
John Peoples
Work # 800-972-7727
Home # 831-626-1514
e-mail john_peoples@sscsinc.com