Not Ranked
I have 22,000 miles on my TKO-600. This is the .64od unit.
No trouble except a slight leak from the front input shaft support housing. I’m looking into this now. It’s either the seal around the input shaft or the sealer under the shaft support. I will replace both before putting the trans back in. The countershaft cap seem to be OK.
This one is set up for the middle shift position. It shifts OK but I sure miss my old Muncie and Comp Plus - another car, a different day.
The motor is a 427w with 440 rwtq & rwhp. Abuse includes 50 or more dyno runs, six days on the road track and seven ¼ miles runs. Shouldn’t forget the fun on the street.
Trans is fine and I expect it to last a long time.
Jim
|