Not Ranked
With any FE intake, I would always open the pushrod tubes up, especially near the top, because in my experience there always has been several pushrods that rub the tube, and you might as well open the pushrod tubes before installing the intake, to save you from removing the intake to open them up later.
__________________
"After jumping into an early lead, Miles pitted for no reason. He let the entire field go by before re-entering the race. The crowd was jumping up and down as he stunned the Chevrolet drivers by easily passing the entire field to finish second behind MacDonald's other team Cobra. The Corvette people were completely demoralized."
|