Not Ranked
Thanks, guys, I'm still quite a newbie and I've found many, many answers here and I've been trying to be a little more active on the site.
Rick I think I'm a little lost when I read my cam card.
Maybe somebody out there would be nice enough to help me with the explanation??? (and if my carb would be too large for this setup)
When it ran on the stand at the builders, it seemed very responsive, tight, had a very lopey sound(i think) for a 351w, and what I ordered. Ipretty comfortable with it but will always listen to a knowledgable second opinion.
Here's what I have:
Part # 35-452-8 Comp Cams
Intake Exhaust
Gross valve lift .544 .544
Duration @ .006 tappet lift
290 290
Valve timing @ .006
Intake 39 BTDC 71
EXH 79 BBDC 31
These specs are for cam installed @106.0 intake center line
Intake Exhaust
Duration @ .050 230 230
lobe lift .3400 .3400
lobe seperation 110.0
Any comments, critiques, suggestions are welcome.
T'anks,
DUFF
|