View Single Post
  #21 (permalink)  
Old 03-21-2007, 05:00 PM
boxhead's Avatar
boxhead boxhead is offline
CC Member
Visit my Photo Gallery

 
Join Date: Feb 2002
Location: Alice Springs, central Australia, NT
Cobra Make, Engine: Classic revival kit (CR3181), gen III engine, T56 6 speed box, AU XR8 lsd diff
Posts: 5,699
Send a message via Yahoo to boxhead
Not Ranked     
Default

I bought a office chair at an auction for $1.00 that I use in my shed for working.
I have a 6 inch bench grinder with fine stone on one end and wire wheel on the other, I also have an 8 inch bench grinder that has course stone and polishing wheel on the ends.
I allready had a very comprehensive tool kit (ex tech) must haves include the basic spanners, sockets and screwdrivers, I also have a good quality wire crimping kit (caterpillar), a good quality multimeter (fluke), Large & small soldering iron, The nutsert tool is a must have.
I also have a large solid bench mounted to the wall and floor, with a vice at each end and room to move.
Cordless drill, jigsaw, angle grinder, jack & stands, plenty of lights in the roof and a lead light, mig welder, Fridge and radio. [IMG][/IMG]
I am sure there are others that I have forgotten.
I dont have a floor creeper, Instead I bought some old carpet and have laid it down on the ground, my feet dont get sore after standing in the shed looking at cars and it is easier to crawl under the car for a sleep.
__________________

Cruising in 5th


---------------------------------------------
Never be afraid to do something new, Remember, Amateurs built the Ark: Professionals built the Titanic.

Last edited by boxhead; 03-21-2007 at 05:03 PM..
Reply With Quote