View Single Post
  #4 (permalink)  
Old 05-14-2007, 07:48 AM
rbray rbray is offline
CC Member
Visit my Photo Gallery

 
Join Date: Feb 1999
Location: Lexington,KY,
Posts: 513
Not Ranked     
Default

I had a problem getting pedal pressure on my E-M.
It turns out that I was not getting a full stroke on my tilton brake cylinders and therefore, not pushing enough fluid through the system.
My setup has threaded connectors that attach to the pedal. After I backed the connectors off a few turns the pedal was able to push the plungers in the brake cylinders through a full cycle and my problem was solved.

Hope this helps
__________________
Roger
Reply With Quote