[PNJSNAK]

I have some cracks that appeared near where I made the side pipe cut out. I put in what I thought were generous radius in the corners. I noticed these cracks coming from one of the corners while washing it. I did run over something that was thrown up into the wheel well near the bottom of the body.
I asked Joe about it and he said they could have come from that if the hit was big enough, because it looks like the bottom of the body flared fender area is what might have flexed.
You have to get real close to see them and they have not grown any.
Joe said if I had any of the resin left he gave me, he could gring out the crack and fill it with the resin.